Independent Ontario fibre guide
EBOX Referral Code Ontario 2026
Looking for an ebox referral code, ebox promo code, or ebox referral code ontario while researching ebox fibre ontario on Bell FTTH? Use WO27 if the signup flow accepts a referral field. This is not the official EBOX site—always confirm pricing and eligibility on ebox.ca.
Short answer
Use referral code WO27 during signup to request a $25 EBOX bill credit when the referral program applies. Credits are not guaranteed for every cart combination.
Referral code
WO27
Enter WO27 during EBOX signup where a referral code is accepted. If you are eligible under EBOX’s program, you and I may each receive a $25 bill credit. Credits depend on EBOX terms and eligibility.
Disclosure: This site is an independent personal guide. I am not affiliated with EBOX. If you use my referral code, I may receive the same type of referral credit described in EBOX’s public referral materials. Always confirm details on ebox.ca before you order.
Why I chose EBOX fibre
I wanted Bell FTTH performance without overpaying for the same last-mile fibre I could already get at my address. EBOX kept the monthly simple, the install matched what neighbours on Bell described, and the PPPoE + VLAN 40 model let me remove the bundled Wi-Fi router and run my own gateway. Your street may differ—use the address checker before you decide.
EBOX FTTH quick setup summary
- Bell fibre drops at an ONT—think “modem, but for fibre”—not directly into your PC.
- Run Ethernet from the ONT to the WAN port on your router (often a UniFi gateway, pfSense box, or other own router).
- Configure ebox pppoe using the username and password from EBOX, with ebox vlan 40 on the WAN where required.
- Set WAN MTU 1492 for typical PPPoE on Ethernet unless EBOX documents a different value for your circuit.
- Optional: enable IPv6 with DHCPv6-PD after IPv4 is stable.
Deep dives: EBOX UniFi setup, own router requirements, and EBOX vs TekSavvy.
UniFi / own-router quick settings
- Connection: PPPoE with credentials from EBOX
- VLAN: 40 on WAN (common for Bell-style FTTH)
- MTU: 1492 on the PPPoE interface
- Physical: ONT Ethernet → UniFi WAN
Full walkthrough: ebox unifi guide with troubleshooting for VLAN mistakes, MTU issues, and link speed.
EBOX vs TekSavvy quick comparison
| Topic | EBOX | TekSavvy |
|---|---|---|
| Typical positioning | Aggressive Bell FTTH resale pricing; popular with DIY networking crowds. | Established independent ISP brand; broader legacy DSL/cable mix. |
| Own-router path | Common community guides for PPPoE, VLAN 40, MTU 1492 on UniFi and similar. | Also discussed for BYOR; verify current TekSavvy Bell FTTH notes for your address. |
| Value signal | Often highlighted for price per Mbps on Bell fibre where available. | Compare promos; may differ by neighbourhood and current acquisition offers. |
Expanded comparison table and “who should pick which ISP” notes live on the EBOX vs TekSavvy fibre page.
FAQ
What is the EBOX referral code?
This guide uses referral code WO27. Enter it during EBOX signup if the checkout shows a referral field. Bill credits depend on EBOX’s referral rules and eligibility.
Can I use my own router with EBOX fibre?
Often yes. EBOX fibre on Bell FTTH is commonly delivered as PPPoE with VLAN tagging. Your router needs PPPoE plus VLAN support (VLAN 40 in many setups) and a sensible MTU for PPPoE (1492 is typical). Not every home router exposes VLAN tagging on the WAN interface.
Can I use UniFi with EBOX fibre?
Yes, many people run UniFi gateways directly off the ONT using PPPoE, VLAN ID 40, and MTU 1492. You usually connect Ethernet from the ONT to the UniFi WAN port, then enter the PPPoE credentials EBOX provides.
Does EBOX fibre use Bell fibre?
EBOX sells Bell-hosted FTTH in many Ontario locations. Your drop is still Bell fibre to the ONT; EBOX is your ISP for service configuration, billing, and support within their product rules.
What VLAN does EBOX fibre use?
Bell wholesale FTTH setups discussed in EBOX communities commonly use VLAN ID 40 on the WAN for PPPoE. Always confirm against the install notes or support message you receive, because exceptions can exist.
What MTU should I use with EBOX PPPoE?
1492 is the usual PPPoE MTU on Ethernet. If you see fragmentation or odd application behaviour, MTU is one of the first values to verify along with VLAN tagging and correct PPPoE credentials.
Where do I find my EBOX PPPoE username and password?
EBOX provides PPPoE credentials through their customer portal, onboarding email, or support workflow. Store them securely; you will need them any time you replace your router.
What is an ONT?
An optical network terminal converts the incoming fibre to an Ethernet handoff for your router. In Bell-style installs it is usually a small indoor unit with a fibre patch and one or more Ethernet ports.
More answers: EBOX fibre FAQ hub covering ebox bell fibre, ebox ont, ebox nokia beacon, CGNAT, IPv6, and stacking promos.
Guides on this site
- EBOX fibre UniFi setup
PPPoE, VLAN 40, MTU 1492, and ONT wiring.
- Own router with EBOX
BYOR requirements and realistic warnings.
- EBOX vs TekSavvy
Value framing without fake reviews.
- Promo code vs referral code
What “ebox promo code” searches usually mean.
- FAQ: ebox ftth, PPPoE, referral timing
Structured answers for long-tail Ontario searches.
Ready to order?
If this guide saved you time, consider using referral code WO27 during EBOX checkout when a referral field appears. Always verify current pricing, terms, and eligibility directly on ebox.ca before ordering.
If this guide helped you sign up
Consider using referral code WO27 during checkout if EBOX shows a referral field. Eligibility and credit timing follow EBOX’s current terms.